FACILITIES
Iwakuni Plant
| Lathe | Diameter 600 x 7,000L, etc. | 2 units |
| Grinding Machine | Diameter 1,500 x 5,500L, etc. | 5 units |
| Mirror polishing machine | Diameter 1,300 x 6,000L, etc. | 4 units |
| Radial drilling machine | 1,500L×850W | 1 units |
| Dynamic Balance Measuring Instrument | Diameter 1,000 x 5,400L, etc. | 2 units |
| Hard chrome plating bath | Length 3,500 x Width 2,000 x 4,000H Length 8,600 x Width 1,150 x 2,200H Diameter 1,700 x 6,500H, etc. | 10 tanks |
| Electro-copper plating bath | Rotary type | 3 tanks |
| Electrolytic nickel plating bath | Rotary type | 2 tanks |
Okayama Plant
NC Lathe machine Diameter 2,100 x 6,000L, etc.
Diameter 1,100 x 10,000L, etc.2 units
2 units
Grinding machine Diameter 2,000 x 10,000L, etc.
Diameter 800 x 12,000L5 units
Large NC Cylindrical Grinding Machine Diameter 2,450 x 10,000 1 units
Mirror polishing machine Diameter 2,300 x 10,000L, etc. 4 units
Automatic buffing machine Diameter 1,000 x 10,000L, etc. 2 units
Dynamic Balance Measuring Instrument Diameter 2,000 x 9,000 L 1 units
Boor-bank drilling machine 1,500Ｌ×850Ｗ 1 units
Hard chrome plating bath Height 3,650 x Width 2,400 x 6,000H
Length 10,000 x Width 2,000 x 3,000H
Diameter 3,600 x 8,300H, etc.4 tanks
Sankel plating bath Length 2,500 x Width 3,000 x 4,000H, etc. 2 tanks
Electrolytic copper plating bath Rotary type 5 tanks
Electro-nickel plating bath Rotary type 3 tanks
Heat treatment and electric furnace Diameter 3,000 x 3,000H, etc.
Length 2,500 x Width 5,000 x 2,500H, etc.3 units
Kudamatsu Plant
| Cylindrical grinder/Nippei | Diameter 410 x 3,000 |
| Surface grinder/Okamoto | 800×400×420Ｈ |
| NC Rotor NX-610/Takizawa | Diameter 350 x 2,500 Diameter 350 x 5,500 |
| Small drilling machine | 860/GD type DMB |
| Cylindrical Grinding Machine / Toshiba | 300×2000 |
For detailed information on facilities, please contact us separately.
1-4-55 Muronokimachi,Iwakuni-shi, Yamaguchi-ken 740-8535 Japan
TEL +81-827-22-3511 FAX +81-827-23-3211
Open：8：00 am
CLose：16：45pm
